For Fabricating a Prototype, you may experienced soldering and de-soldering component or modifying the circuitry. The repeat of soldering will damage the trace. And You need this to repair the expensive prototype PCB board!!!

Applications:

• Repairing damaged or defective pcb traces and tracks
• Repairing membrane switches
• Creating smooth jumpers
• Solderless interconnects
• For both rigid and flexible substrates
• Prototypes

Package Content:

• Silver Conductive Paste

Procedure:

1. Clear up the surface by alcohol
2. Apply a the paste
3. After the desired track is covered
4. Allow 24 hours for drying
5. To achieve maximum conductivity rapidly, cure in oven or hair drier for 10-15 minutes at 100C